P25 conventional decode mode + conventional-channel attribution (node-26#24, #20)

op25-container
- generate-config takes p25_mode "conventional" + conv_channels [{frequency,
  name, nac}]. It builds fixed fsk4 channels (up to 2 on one non-tunable SDR,
  DC spike kept off the channels) with no control channel to hunt. Two
  channels send audio to UDP 23456/23457, and audio.py -2 + amplify(2) keeps
  levels.
- tk_drb_conv.py (a tk_p25.rx_ctl subclass, copied into OP25 apps) reports
  voice / NAC / encryption (LC service options + LDU2 ESS algid/keyid) for
  conventional channels and applies the per-channel NAC filter, which stock
  tk_p25 does not. Analog uses it too.
- Trunked P25 config is unchanged when p25_mode is absent.

drb-edge-node
- radio_config: system kind from type + config.mode (missing = trunked).
- conventional.py normalizes the console: a distinctive LC TGID, else the
  channel's last TGID (30 s), else a synthetic per-channel id (freq/100 Hz).
  Encrypted rows are never talkers. With exactly one conventional channel,
  orphan audio is attributed to it at close, which fixes analog recording
  (#20). The synthetic id and the real TGID on one channel never split.
- Health/dashboard: P25 conventional listen tab (/api/listen p25conv), and
  conventional decode + encryption checks. The checkin carries radio_channels.
- Tests: edge 296 pass; op25-container 18 (new CI job). Reviewed by
  drb-audio-review (findings fixed; simultaneous two-channel mixdown filed
  as #26) and drb-qa-review.

Not verified on SDR hardware.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

op25-container/Dockerfile

@@ -31,6 +31,10 @@ RUN ./install.sh -f
 COPY requirements.txt /tmp/requirements.txt
 RUN pip3 install --no-cache-dir -r /tmp/requirements.txt
 
+# DRB's trunking module for P25 conventional channels (node-26#24): reports
+# encryption + NAC and applies the NAC filter, which stock tk_p25 does not.
+COPY op25_addons/tk_drb_conv.py /op25/op25/gr-op25_repeater/apps/tk_drb_conv.py
+
 # Create the run_multi-rx_service.sh script
 COPY run_multi-rx_service.sh /op25/op25/gr-op25_repeater/apps/run_multi-rx_service.sh
 RUN chmod +x /op25/op25/gr-op25_repeater/apps/run_multi-rx_service.sh