P25 conventional decode mode + conventional-channel attribution (node-26#24, #20)

op25-container
- generate-config takes p25_mode "conventional" + conv_channels [{frequency,
  name, nac}]. It builds fixed fsk4 channels (up to 2 on one non-tunable SDR,
  DC spike kept off the channels) with no control channel to hunt. Two
  channels send audio to UDP 23456/23457, and audio.py -2 + amplify(2) keeps
  levels.
- tk_drb_conv.py (a tk_p25.rx_ctl subclass, copied into OP25 apps) reports
  voice / NAC / encryption (LC service options + LDU2 ESS algid/keyid) for
  conventional channels and applies the per-channel NAC filter, which stock
  tk_p25 does not. Analog uses it too.
- Trunked P25 config is unchanged when p25_mode is absent.

drb-edge-node
- radio_config: system kind from type + config.mode (missing = trunked).
- conventional.py normalizes the console: a distinctive LC TGID, else the
  channel's last TGID (30 s), else a synthetic per-channel id (freq/100 Hz).
  Encrypted rows are never talkers. With exactly one conventional channel,
  orphan audio is attributed to it at close, which fixes analog recording
  (#20). The synthetic id and the real TGID on one channel never split.
- Health/dashboard: P25 conventional listen tab (/api/listen p25conv), and
  conventional decode + encryption checks. The checkin carries radio_channels.
- Tests: edge 296 pass; op25-container 18 (new CI job). Reviewed by
  drb-audio-review (findings fixed; simultaneous two-channel mixdown filed
  as #26) and drb-qa-review.

Not verified on SDR hardware.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

op25-container/app/internal/conventional_config.py

@@ -0,0 +1,118 @@
+"""
+P25 conventional OP25 config (node-26#24).
+
+A conventional P25 channel is a fixed voice frequency with no control channel:
+radios key up on it directly, C4FM (fsk4), and identify themselves in the link
+control of each LDU1 (talkgroup + unit id) and the ESS of each LDU2
+(encryption algorithm + key id). Building a `tk_p25.py` trunking config for one
+— what "P25" always meant before — makes OP25 hunt forever for a control
+channel that does not exist, so nothing is ever decoded.
+
+Layout this produces, per boatbod OP25 gr310 `p25_conventional_example.json`:
+
+  * one non-tunable device parked so every channel sits inside its passband;
+  * one channel per frequency, `trunking_sysname: ""` (so the trunking module
+    treats it as conventional), `demod_type: fsk4`;
+  * trunking module `tk_drb_conv.py` with no chans — our thin subclass of
+    tk_p25.rx_ctl that reports encryption and the NAC for conventional
+    channels and applies the per-channel NAC filter (tk_p25 itself does
+    neither for FDMA conventional);
+  * channel N's audio to UDP 23456+N; with two channels audio.py runs in
+    two-channel mode (left = first channel, right = second).
+
+Pure: no file I/O, so it is unit-testable outside the container.
+"""
+from typing import Any, Dict, List, Tuple
+
+from models import ChannelConfig, ConventionalChannel, DeviceConfig, TerminalConfig
+
+# Two is what one audio.py instance can carry (its A and B sockets). A third
+# channel would need a second audio pipeline into PulseAudio.
+MAX_CONVENTIONAL_CHANNELS = 2
+
+AUDIO_UDP_BASE_PORT = 23456
+
+DEVICE_RATE = 1_920_000
+DEVICE_USABLE_BW_PCT = 0.85
+# Half the occupied bandwidth of a 12.5 kHz P25 channel.
+CHANNEL_HALF_BW_HZ = 6_250
+# Keep the RTL-SDR's DC spike off the channels. A single channel (or two very
+# close together) is offset from the centre; channels further apart than
+# 2x this already straddle the spike, so the centre goes between them.
+DC_SPIKE_OFFSET_HZ = 250_000
+DC_SPIKE_CLEARANCE_HZ = 50_000
+
+CONVENTIONAL_TRUNKING_MODULE = "tk_drb_conv.py"
+
+
+def device_center(freqs: List[int]) -> int:
+    lo, hi = min(freqs), max(freqs)
+    mid = (lo + hi) // 2
+    if (hi - lo) // 2 >= DC_SPIKE_CLEARANCE_HZ:
+        return mid
+    return mid + DC_SPIKE_OFFSET_HZ
+
+
+def validate_channels(channels: List[ConventionalChannel]) -> None:
+    """Raise ValueError with an operator-readable reason."""
+    if not channels:
+        raise ValueError("P25 conventional needs at least one channel frequency.")
+    if len(channels) > MAX_CONVENTIONAL_CHANNELS:
+        raise ValueError(
+            f"P25 conventional supports up to {MAX_CONVENTIONAL_CHANNELS} channels on one SDR "
+            f"(got {len(channels)})."
+        )
+    freqs = [c.frequency for c in channels]
+    if len(set(freqs)) != len(freqs):
+        raise ValueError("The same conventional frequency is listed twice.")
+    for c in channels:
+        if c.nac is not None and not (0 < c.nac <= 0xFFF):
+            raise ValueError(f"NAC {c.nac:#x} on {c.frequency / 1e6:.5f} MHz is outside 0x001-0xFFF.")
+    center = device_center(freqs)
+    half = DEVICE_RATE * DEVICE_USABLE_BW_PCT / 2
+    for f in freqs:
+        if abs(f - center) + CHANNEL_HALF_BW_HZ > half:
+            span = (max(freqs) - min(freqs)) / 1e6
+            raise ValueError(
+                f"These channels are {span:.3f} MHz apart — too far for one SDR "
+                f"(max ~{(2 * (half - CHANNEL_HALF_BW_HZ)) / 1e6:.2f} MHz)."
+            )
+
+
+def build_conventional_config(
+    system_name: str,
+    channels: List[ConventionalChannel],
+    gains: str,
+    ppm: float,
+) -> Tuple[Dict[str, Any], bool]:
+    """Return (OP25 config dict, two_channel_audio)."""
+    validate_channels(channels)
+    freqs = [c.frequency for c in channels]
+    center = device_center(freqs)
+
+    chans = []
+    for i, c in enumerate(channels):
+        chans.append(ChannelConfig(
+            name=c.name or f"{system_name} {c.frequency / 1e6:.4f}",
+            trunking_sysname="",
+            enable_analog="off",
+            demod_type="fsk4",
+            filter_type="rc",
+            frequency=c.frequency,
+            meta_stream_name="",
+            destination=f"udp://127.0.0.1:{AUDIO_UDP_BASE_PORT + i}",
+            nac=c.nac,
+            crypt_behavior=2,
+        ))
+
+    device = DeviceConfig(
+        gains=gains, ppm=ppm, tunable=False, frequency=center,
+        rate=DEVICE_RATE, usable_bw_pct=DEVICE_USABLE_BW_PCT,
+    )
+    config = {
+        "channels": [ch.model_dump() for ch in chans],
+        "devices": [device.model_dump()],
+        "trunking": {"module": CONVENTIONAL_TRUNKING_MODULE, "chans": []},
+        "terminal": TerminalConfig().model_dump(),
+    }
+    return config, len(chans) > 1