Three unrelated failures from `make test` on the node:
test_metadata_watcher: two tests asserted the old zero-pad tgid_change
contract. Both were off by exactly call_tail_pad_seconds, i.e. the code
was doing what f1de157 intended and the tests encoded the behaviour we
deliberately changed. Updated to expect the pad.
test_pulse: four async tests errored with "async def functions are not
natively supported". Root cause is not the tests - pytest.ini sets
asyncio_mode = auto but the Dockerfile only copies app/ and tests/, so
the container had no pytest config at all and fell back to strict mode.
That is also why these passed in a local venv and failed on the node.
Copy pytest.ini into the image, and add explicit @pytest.mark.asyncio so
the tests hold up regardless of how pytest is configured.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
The recording window is anchored to OP25 control-channel timestamps, but
the buffered audio lags those by roughly 1.5s. Trim logs across seven
calls measured the offset at 0.84-1.62s, consistently present.
At a 1.0s pad a short call closed its window before the voice arrived:
a 0.97s control-channel call closed at T+1.97 while voice started around
T+1.5, capturing ~0.4s of speech and cutting mid-word. Confirmed by a
0.57s file whose final 0.10s measured -12.2dB against its own -18.2dB
average - clipped speech, not a tail - and by two short calls that
logged no trim at all because no trailing silence remained.
Being generous is free here: trim_silence already strips trailing
silence back to the guard margin before upload, so long calls are
unaffected while short ones gain the window they need. Over-capture
costs nothing; under-capture loses words permanently.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
The pulse_socket named volume survives container recreation, so after a
compose recreate the previous container's /run/pulse/pid and native
socket were still present. PulseAudio read the stale pid file, decided a
daemon was already running, and refused to start:
E: [pulseaudio] pid.c: Daemon already running.
The entrypoint still reported "PulseAudio socket ready" because it only
checked that the socket file existed - and a stale one did. Capture then
failed in a restart loop against a dead daemon.
Readiness in both the op25 entrypoint and drb-edge-node now means a
pactl probe actually succeeds. Stale pid/socket are removed only when
that probe fails, so a live daemon's socket is never deleted.
pulseaudio-utils was missing from the edge-node image (only libpulse0
was installed), so no pactl binary existed there at all - added.
Capture exits are now classified: a missing source logs at ERROR and
names the configured PULSE_SOURCE, rather than looking identical to
"daemon not up yet". Retrying forever against a wrong source name is how
the April PulseAudio failure stayed hidden.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
Measured six recordings off a live P25 node and found two independent
defects causing lost audio at the end of calls:
- stop_recording() sliced the ring buffer immediately, so if the MP3
muxer had not yet delivered the tail the file was silently short.
Now waits (bounded, 2s) until buffered audio covers the end epoch.
- TGID-change closes used the new grant's epoch as the end with no pad
at all, guaranteeing truncation on every split. Tail pad is now a
setting, default raised 0.5s -> 1.0s.
The ring buffer also capped maximum call length: a call longer than the
buffer had its front silently clamped. The ring now serves the pre-roll
only, with a per-call accumulator for the rest, bounded at 4.8MB.
Clamping is loudly warned rather than silent.
Uploads averaged 63% silence, which inflates STT cost and is a known
Whisper hallucination trigger. Leading/trailing silence is now trimmed
conservatively (-40dB, 0.25s guard, internal pauses untouched).
started_at/ended_at still describe the call; new audio_* fields carry
the trimmed audio bounds so playback can map back to wall clock.
All-silence recordings are skipped and logged instead of uploaded.
Also: log measured control-channel idle on idle-timeout closes so
CALL_IDLE_TIMEOUT can be tuned from data, and quiet the httpx logger
which emitted ~170k lines/day of poll noise.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
Logan Cusano