- Rewritten as RadioManager reconciling C2's retained
nodes/{id}/discord/desired (token ids) and publishing
nodes/{id}/discord/actual {applied_seq, sessions, streams}.
- One gateway session per leased token, one voice connection per
(token, guild); a token no stream needs is logged OUT (client.close()),
which is what lets C2 free it safely (item 1).
- Watchdog is a separate reconcile loop; recovering a dead session can no
longer cancel it (item 2). Presence kept across rejoins.
- No message-content intent and no @bot leave/join mention controls (item 3).
- Local dashboard: /api/discord/join returns 409 with an explanation instead
of a TypeError 500; /api/discord/leave pauses locally; GET /api/discord
shows state (item 4). Join/leave results are reported to C2 (item 5).
- Token strings fetched over HTTPS from C2 (lease holder only), memory only.
- MQTT-loss fail-safe: logs every bot out after
DISCORD_MQTT_LOSS_STOP_SECONDS (300, below C2's 600s lease grace).
- Legacy discord_join/discord_leave MQTT commands are ignored.
- Audio path unchanged: FFmpeg -f pulse on settings.pulse_source per
connection, never Icecast.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
op25-container
- generate-config takes p25_mode "conventional" + conv_channels [{frequency,
name, nac}]. It builds fixed fsk4 channels (up to 2 on one non-tunable SDR,
DC spike kept off the channels) with no control channel to hunt. Two
channels send audio to UDP 23456/23457, and audio.py -2 + amplify(2) keeps
levels.
- tk_drb_conv.py (a tk_p25.rx_ctl subclass, copied into OP25 apps) reports
voice / NAC / encryption (LC service options + LDU2 ESS algid/keyid) for
conventional channels and applies the per-channel NAC filter, which stock
tk_p25 does not. Analog uses it too.
- Trunked P25 config is unchanged when p25_mode is absent.
drb-edge-node
- radio_config: system kind from type + config.mode (missing = trunked).
- conventional.py normalizes the console: a distinctive LC TGID, else the
channel's last TGID (30 s), else a synthetic per-channel id (freq/100 Hz).
Encrypted rows are never talkers. With exactly one conventional channel,
orphan audio is attributed to it at close, which fixes analog recording
(#20). The synthetic id and the real TGID on one channel never split.
- Health/dashboard: P25 conventional listen tab (/api/listen p25conv), and
conventional decode + encryption checks. The checkin carries radio_channels.
- Tests: edge 296 pass; op25-container 18 (new CI job). Reviewed by
drb-audio-review (findings fixed; simultaneous two-channel mixdown filed
as #26) and drb-qa-review.
Not verified on SDR hardware.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
install.sh (#14): after enrolling it now BLOCKS until an admin approves,
printing "Please have an admin approve node '<id>' at <app>/settings/nodes
to continue", polling GET /nodes/{id}/credentials with the pickup secret
(no default timeout; Ctrl-C safe; re-run resumes from configs/pickup_secret).
A re-run with a key on disk re-checks it against C2 and replaces a stale
(reissued) key. credentials.json is merged atomically so the dashboard auth
salt/secret survive. edge-node is ALWAYS force-recreated at the end, so a key
written after the container started is loaded. --wait-approval N caps the
wait; 0 = don't wait. git fetch uses --force so a re-cut v1 tag is accepted.
edge-node (#14): with no key at startup, or on a broker auth refusal
(CONNACK 4/5/134/135), mqtt_manager re-reads credentials.json, else fetches
the key over HTTPS (key_pickup.py, pickup secret from /configs), persists it
and rebuilds the paho client in place. Single-flight, 30s..15min backoff.
A key pushed over MQTT while connected is applied for the next reconnect.
OTA (#15): node_update no longer os._exit()s. It drops
configs/update-requested; install.sh installs scripts/install-updater.sh's
drb-update.{service,timer,path}. The path unit fires on the sentinel, the
timer (~15 min) does an HTTPS check-in (POST /nodes/{id}/update-check,
server-26 PR) so offline/locked-out nodes still update. drb-update.sh only
installs the repo/ref/registry in root-owned /etc/drb/updater.conf; C2's
answer is just a timestamp; origin and registry mismatches abort; creds go
to curl via a 0600 header file.
Tests: test_credential_recovery.py, test_host_updater.py (runs the real
updater script with stub git/docker/curl).
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
QA blocker: when the secondary-sdr container was down, the checkin
omitted secondary_sdr_running / sdr_devices / op25_sdr_serial, and C2
only overwrites keys that are present, so the dashboard kept the last
'Running' forever. Send explicit nulls. The local card also says 'not
reported' rather than 'not plugged in' for a pin it can't check.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Fixes node-26#11. OP25's generated config said "rtl" (= whichever dongle
enumerates first), so on 2-SDR nodes a decoder could take OP25's dongle
and stop recording. Now:
- sdr_pins: {op25|adsb|ais: serial}, absent = automatic. Every OP25
config generation (op25_client.generate_config) rewrites the device to
rtl=<serial>: the pin, else the first dongle's serial, which is what
"rtl" always opened. Left as "rtl" only for unknown/shared serials.
- secondary-sdr: /secondary/devices lists dongles + serials via librtlsdr
(works while claimed). apply(priority, pins, reserved) never touches
OP25's dongle, gives a pinned service only its own dongle, lets a
higher-priority service take a spare from a lower one, and still runs a
pinned lower-priority service when the top pick has no dongle.
- sdr_settings.py replaces secondary_priority.py: one apply path for the
local dashboard, the new set_sdr_config C2 command (set_secondary_priority
kept as an alias) and config pushes. OP25 restarts only when its own
dongle changes. Checkin reports sdr_devices, sdr_pins, op25_sdr_serial.
- Local dashboard: 'SDRs' card with an OP25 SDR dropdown and a per-service
dongle dropdown, duplicate-serial and double-pin warnings.
Verified: edge-node pytest 194 passed; secondary-sdr tests 7 passed;
flake8 clean; page JS passes node --check.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
op25's :stable image has no lsusb, and /op25/devices answers count 0
instead of unknown, so the dashboard said radio-box 'reports 0 SDRs'
with 2 plugged in. Prefer the secondary-sdr container's lsusb count;
treat 0 from op25 as unknown.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Replaces the single secondary_sdr_mode with secondary_sdr_priority, e.g.
["adsb", "ais"]. OP25 always keeps its own dongle; the secondary-sdr
container starts decoders top-down until it runs out of free SDRs, so a
3-SDR node runs ADS-B and AIS at once and a 2-SDR node runs the top pick.
- secondary-sdr: one decoder per mode, POST /secondary/apply(priority)
(no-op when the right prefix is already running), orphaned decoders
from a uvicorn reload are reaped on start, /status reports sdr_count
via lsusb (op25's :stable image has none).
- edge-node: one apply path (set_secondary_priority) for the local
dashboard, a new C2 'set_secondary_priority' MQTT command, and config
pushes; it never restarts op25. Legacy mode migrates on load. Checkin
reports priority, what's running, and sdr_count. Uplink forwards
aircraft and vessels whenever either is present.
- Local dashboard: 'Secondary SDRs' card to enable/reorder/save.
Verified: edge-node pytest 190 passed, flake8 clean.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Adds a per-node secondary_sdr_mode config field (none|adsb|ais|op25_2),
applied the same way as hardware_preset/ppm_override so it survives system
reassignment. op25-container gets a GET /devices endpoint that counts
connected SDRs via lsusb; the edge-node checkin now reports sdr_count and
secondary_sdr_mode up to the server, the first node-initiated hardware
report (everything else was C2 pushing config down). Tracked as node-26#9.
Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com>
Two unauthenticated surfaces closed on the edge node.
Dashboard and API: the local dashboard and every /api/* route were open to
anything on the node's LAN. Adds a login page plus session-cookie auth for
the browser, and cookie-or-Basic for the API so scripted callers stay
possible. Passwords are hashed with stdlib scrypt (no new dependency, this
runs on a Pi) and compared in constant time; the salt and session-signing
secret persist in credentials.json. Startup warns while the default password
is still in place. No non-browser callers of the node API exist today
(C2 talks to nodes over MQTT and nodes call C2 outbound), so nothing breaks.
Adds python-multipart, which FastAPI's Form() needs for the login POST and
which was missing from requirements entirely.
MQTT: nodes authenticated with a shared drb-node password, and the broker
ACL keyed off %c — the client-supplied client id — so any holder of that one
password could claim another node's topic namespace. Nodes now connect as
username=<node_id>, password=<their C2-issued api_key>, which mosquitto's
dynamic-security plugin checks, with the ACL keyed off the authenticated %u.
TLS is gated on MQTT_TLS and uses default CA verification.
The old key_request MQTT path stays in place behind TODO(mqtt-cutover)
markers as the fallback until the cutover is proven; a node with no api_key
on disk logs a clear repeated refusal rather than spinning.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
docker-compose.yml: Added a pulse_socket named volume mounted at /run/pulse in both op25 and edge-node. Also set PULSE_SERVER=unix:/run/pulse/native in edge-node so libpulse (and ffmpeg's pulse input) finds the right socket.
discord_radio.py: Removed _icecast_url and changed _play_stream() to use -f pulse -i default.monitor. This reads directly from the PulseAudio sink monitor — zero buffer delay. The PULSE_SERVER env var is inherited by the ffmpeg subprocess.
Note: default.monitor captures whatever audio is playing on the default sink. If OP25 uses a named virtual sink, you may need to replace default.monitor with <sink_name>.monitor (run pactl list sinks short inside the op25 container to find the name).
Issue 2 — No audio URL / GCS credentials
storage.py: storage.Client() was using ADC but ADC isn't configured in the container. Now uses storage.Client.from_service_account_json(settings.gcp_credentials_path) when GCP_CREDENTIALS_PATH is set — same credential file Firebase already loads.
You also need to mount the key file into the server container in docker-compose.yml:
c2-core:
volumes:
- ./gcp-key.json:/app/gcp-key.json:ro
And set GCS_BUCKET=your-bucket-name in .env.
Issue 3 — Token orphaning
mqtt_manager.py: Every checkin now includes "discord_connected": radio_bot.is_connected.
mqtt_handler.py: On checkin, if discord_connected is explicitly False, calls release_token(node_id). Only fires on explicit false (missing field = unknown = no action).
node_sweeper.py: When a node is swept to offline, its token is released too. This covers the case where the node stops checking in entirely (crash/power loss).
Logan CusanoandClaude Opus 5.5