node-26#9. New secondary-sdr-container claims the node's SECOND physical
SDR (RTL-SDR index 1 — op25 always claims index 0; no serial-based binding
yet, same gap op25 itself has). Its control API (start/stop/status/data,
mirroring op25_controller.py) launches dump1090 in adsb mode and exposes
the decoded aircraft.json snapshot; AIS mode 400s until it's wired next.
edge-node: on_config_push starts/stops it when secondary_sdr_mode changes,
lifespan resumes it after a restart if already configured, and a new
telemetry_uplink_loop polls its /secondary/data every 10s and POSTs
non-empty snapshots to C2's new /telemetry/adsb (same bearer-key pattern
call_recorder.py already uses for audio upload).
UNVERIFIED: this container has not been built or run against real hardware
in this session (sandboxed authoring machine, no docker) — dump1090's
--write-json field names are believed correct from its docs but not
confirmed against a real capture. Build + hardware smoke test before this
reaches a real node.
Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com>
Adds a per-node secondary_sdr_mode config field (none|adsb|ais|op25_2),
applied the same way as hardware_preset/ppm_override so it survives system
reassignment. op25-container gets a GET /devices endpoint that counts
connected SDRs via lsusb; the edge-node checkin now reports sdr_count and
secondary_sdr_mode up to the server, the first node-initiated hardware
report (everything else was C2 pushing config down). Tracked as node-26#9.
Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com>
Pure formatting, no behaviour change: strip trailing whitespace from blank
lines, give top-level defs in system_cacher.py their two blank lines, wrap
the long discord_radio.join signature, and split the duplicated
active_config ternary in main.py and routers/api.py across lines.
Verified clean with flake8 --max-line-length=120, matching CI.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
Two unauthenticated surfaces closed on the edge node.
Dashboard and API: the local dashboard and every /api/* route were open to
anything on the node's LAN. Adds a login page plus session-cookie auth for
the browser, and cookie-or-Basic for the API so scripted callers stay
possible. Passwords are hashed with stdlib scrypt (no new dependency, this
runs on a Pi) and compared in constant time; the salt and session-signing
secret persist in credentials.json. Startup warns while the default password
is still in place. No non-browser callers of the node API exist today
(C2 talks to nodes over MQTT and nodes call C2 outbound), so nothing breaks.
Adds python-multipart, which FastAPI's Form() needs for the login POST and
which was missing from requirements entirely.
MQTT: nodes authenticated with a shared drb-node password, and the broker
ACL keyed off %c — the client-supplied client id — so any holder of that one
password could claim another node's topic namespace. Nodes now connect as
username=<node_id>, password=<their C2-issued api_key>, which mosquitto's
dynamic-security plugin checks, with the ACL keyed off the authenticated %u.
TLS is gated on MQTT_TLS and uses default CA verification.
The old key_request MQTT path stays in place behind TODO(mqtt-cutover)
markers as the fallback until the cutover is proven; a node with no api_key
on disk logs a clear repeated refusal rather than spinning.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
The control channel was wrong in both directions. Grants fire 0.84-1.62s
before anyone speaks, and srcaddr can drop to 0 while someone is still
talking - one recording came back "-1.61s lead, -0.00s tail", the trim
finding nothing to remove because the window had closed on live speech.
Confirmed by ear: the cut lands at a word boundary on an unfinished word.
Audio is ground truth for WHEN. The console remains the only source of
WHO, so it still supplies talkgroup, alias and rid.
START voice onset in the captured audio, with a 0.25s pre-roll that
now covers only chunk quantisation and threshold ramp-up rather
than a variable control-channel offset.
STOP call_silence_timeout seconds of silence heard in the audio.
LABEL resolved AT CLOSE from a bounded rolling history of console
observations overlapping the window, +4s/-2s, because there is
no guaranteed ordering between a grant and its audio.
SPLIT a console talkgroup change still forces a cut, since two calls
with no silence between them would otherwise merge into one.
Capture now emits raw PCM instead of MP3. Silence detection becomes
integer arithmetic per chunk with no decode, trimming becomes a byte
offset slice rather than a second ffmpeg pass, and MP3 encoding happens
exactly once at save - uploads are no longer double-encoded.
Audio with no talkgroup anywhere in its window is discarded rather than
uploaded: an untagged call silently poisons incident correlation, which
is worse than losing the audio. Logged at ERROR and counted on
/api/status.
When capture produces no audio at all the old console state machine
still runs, so a node with a broken audio path keeps reporting radio
activity. That is now the only consumer of call_idle_timeout.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
Measured six recordings off a live P25 node and found two independent
defects causing lost audio at the end of calls:
- stop_recording() sliced the ring buffer immediately, so if the MP3
muxer had not yet delivered the tail the file was silently short.
Now waits (bounded, 2s) until buffered audio covers the end epoch.
- TGID-change closes used the new grant's epoch as the end with no pad
at all, guaranteeing truncation on every split. Tail pad is now a
setting, default raised 0.5s -> 1.0s.
The ring buffer also capped maximum call length: a call longer than the
buffer had its front silently clamped. The ring now serves the pre-roll
only, with a per-call accumulator for the rest, bounded at 4.8MB.
Clamping is loudly warned rather than silent.
Uploads averaged 63% silence, which inflates STT cost and is a known
Whisper hallucination trigger. Leading/trailing silence is now trimmed
conservatively (-40dB, 0.25s guard, internal pauses untouched).
started_at/ended_at still describe the call; new audio_* fields carry
the trimmed audio bounds so playback can map back to wall clock.
All-silence recordings are skipped and logged instead of uploaded.
Also: log measured control-channel idle on idle-timeout closes so
CALL_IDLE_TIMEOUT can be tuned from data, and quiet the httpx logger
which emitted ~170k lines/day of poll noise.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
- RadioBot.join() accepts system_name parameter
- Sets bot activity to ActivityType.listening → system name on connect
- Clears presence (activity=None) on leave
- main.py passes system_name from MQTT payload to radio_bot.join()
Logan CusanoandClaude Sonnet 5