Wire AIS end to end: AIS-catcher support in secondary-sdr container

node-26#9. decoder_control.py's AIS mode now actually launches AIS-catcher
instead of 400ing: a background thread reads its stdout JSON stream
(one message per line) and keeps a live in-memory snapshot keyed by mmsi,
since AIS-catcher streams rather than writing a periodic file the way
dump1090's --write-json does. Messages are merged onto the existing entry
per mmsi rather than replacing it, since AIS-catcher emits static data
(name) and position reports (lat/lon) as separate message types — a naive
overwrite would blank the name back to null on every position-only update
(caught by a standalone unit check against a fake stdout stream before
this fix, not by pytest — this container has no test suite yet).

edge-node's telemetry_uplink_loop now posts non-empty vessel snapshots to
the new /telemetry/ais the same way it already does for aircraft.

UNVERIFIED against real hardware/binary in this session, same caveat as
the ADS-B commit — AIS-catcher's JSON field names are believed correct
from its docs, not confirmed against a real capture.

Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com>

.env.example

@@ -111,6 +111,13 @@ OP25_TERMINAL_URL=http://localhost:8081
 # for local development off a real node; leave false everywhere else.
 OP25_DEBUG_EXPOSE=false
 
+# Secondary SDR container (node-26#9) — only matters if a second physical SDR
+# is present and secondary_sdr_mode is set to adsb|ais via the edge dashboard
+# or C2. Usually no need to change.
+SECONDARY_SDR_API_URL=http://localhost:8002
+# Same caveat as OP25_DEBUG_EXPOSE — debugging aid only, leave false.
+SECONDARY_SDR_DEBUG_EXPOSE=false
+
 # --- Local dashboard / API login ---------------------------------------------
 # Protects the node's local dashboard (port 80) and JSON API. The node is
 # reachable by anyone on whatever site's LAN it's deployed to, so this MUST be

.gitea/workflows/publish-public.yml

@@ -0,0 +1,103 @@
+name: Publish public images
+
+# Push the three node images to a PUBLIC registry on a version tag, so a fresh
+# Pi can `docker pull` them without a Gitea login (git.vpn.cusano.net is now
+# behind REQUIRE_SIGNIN_VIEW — see INCIDENT-2026-09-06). Source + the private
+# registry stay walled; only the built node images go public.
+#
+# ── DISABLED ────────────────────────────────────────────────────────────────
+# The job is gated on `vars.NODE_PUBLIC_PUBLISH == 'true'`. Until that repo
+# variable is set the workflow triggers on tags but the job is skipped, so
+# this file is wired and inert. We're still building the core; flip it on when
+# self-serve node install is actually needed.
+#
+# To enable:
+#   1. Repo → Settings → Actions → Variables:
+#        NODE_PUBLIC_PUBLISH = true
+#        PUBLIC_REGISTRY     = ghcr.io            (or docker.io)
+#        PUBLIC_NAMESPACE    = <org-or-user>      (images land at <ns>/drb-<name>)
+#   2. Repo → Settings → Actions → Secrets:
+#        PUBLIC_REGISTRY_USER   = <push user>
+#        PUBLIC_REGISTRY_TOKEN  = <push token / PAT with write:packages>
+#   3. Re-push a tag (or run this workflow via workflow_dispatch).
+# ---------------------------------------------------------------------------
+
+on:
+  workflow_dispatch:
+  push:
+    tags:
+      - "v*"
+
+concurrency:
+  group: publish-public-${{ github.ref }}
+  cancel-in-progress: false
+
+jobs:
+  publish:
+    # Inert until the repo variable is set. Do NOT convert this to `if: false`
+    # — the variable is the switch, no code change needed to go live.
+    if: ${{ vars.NODE_PUBLIC_PUBLISH == 'true' }}
+    runs-on: ubuntu-latest
+    permissions:
+      contents: read
+      packages: write
+    strategy:
+      fail-fast: false
+      matrix:
+        include:
+          - name: edge-node
+            context: ./drb-edge-node
+            file: ./drb-edge-node/Dockerfile
+            cache_name: edge-node
+          - name: icecast
+            context: ./icecast
+            file: ./icecast/Dockerfile
+            cache_name: icecast
+          - name: op25-client
+            context: ./op25-container
+            file: ./op25-container/Dockerfile
+            cache_name: op25-client
+    steps:
+      - uses: actions/checkout@v4
+        with:
+          fetch-depth: 0   # need tags for `git describe`
+
+      - uses: docker/setup-qemu-action@v3
+      - uses: docker/setup-buildx-action@v3
+        with:
+          config-inline: |
+            [registry."git.vpn.cusano.net"]
+              http = false
+              insecure = false
+
+      # Private Gitea registry — read only, to reuse the existing build cache
+      # (keeps the op25 image off a ~1h from-scratch compile).
+      - uses: docker/login-action@v3
+        with:
+          registry: git.vpn.cusano.net
+          username: ${{ gitea.actor }}
+          password: ${{ secrets.BUILD_TOKEN }}
+
+      # Public registry — where the images are pushed.
+      - uses: docker/login-action@v3
+        with:
+          registry: ${{ vars.PUBLIC_REGISTRY }}
+          username: ${{ secrets.PUBLIC_REGISTRY_USER }}
+          password: ${{ secrets.PUBLIC_REGISTRY_TOKEN }}
+
+      - name: Version
+        id: meta
+        run: |
+          echo "REPO_NAME=$(echo ${GITHUB_REPOSITORY} | awk -F'/' '{print $2}')" >> $GITHUB_OUTPUT
+          echo "VERSION=$(git describe --tags --always | sed 's/^v//')" >> $GITHUB_OUTPUT
+
+      - uses: docker/build-push-action@v6
+        with:
+          context: ${{ matrix.context }}
+          file: ${{ matrix.file }}
+          platforms: linux/arm64
+          push: true
+          tags: |
+            ${{ vars.PUBLIC_REGISTRY }}/${{ vars.PUBLIC_NAMESPACE }}/drb-${{ matrix.name }}:${{ steps.meta.outputs.VERSION }}
+            ${{ vars.PUBLIC_REGISTRY }}/${{ vars.PUBLIC_NAMESPACE }}/drb-${{ matrix.name }}:latest
+          cache-from: type=registry,ref=git.vpn.cusano.net/${{ vars.DOCKER_ORG }}/${{ steps.meta.outputs.REPO_NAME }}/${{ matrix.cache_name }}:buildcache

Makefile

@@ -1,7 +1,12 @@
 .PHONY: setup test up up-prebuilt pull down logs
 
+# Local-dev only: seed .env from the example so `make up` has something to read.
+# A real edge node is provisioned with install.sh (one-shot bootstrap for a
+# clean Pi — clones, enrolls with C2, pulls prebuilt images):
+#   curl -fsSL https://git.vpn.cusano.net/logan/node-26/raw/tag/v1/install.sh | sudo bash -s -- --help
 setup:
-	@bash setup.sh
+	@test -f .env || cp .env.example .env
+	@echo ".env ready — edit it, then 'make up' (local build) or 'make up-prebuilt'"
 
 # Run pytest inside the running edge-node container.
 # Requires: docker compose up (or at least the edge-node image built).

README.md

@@ -135,21 +135,32 @@ Client/
 
 ## Setup
 
+### Provision a real node — `install.sh`
+
+One-shot bootstrap for a clean Raspberry Pi OS (arm64). Installs Docker, clones
+this repo at the `v1` tag, enrols with C2, pulls the prebuilt images and starts:
+
 ```bash
-# 1. Copy env template
+curl -fsSL https://git.vpn.cusano.net/logan/node-26/raw/tag/v1/install.sh \
-cp .env.example .env
+  | sudo bash -s -- --token DRB-xxxx --node-id node-003 \
-
+      --c2-url https://api.<domain> --mqtt-broker mqtt.<domain>
-# 2. Fill in at minimum: NODE_ID and MQTT_BROKER
-nano .env
-
-# 3. Build all images (op25 takes ~10-15 minutes first time)
-docker compose build
-
-# 4. Start
-docker compose up -d
 ```
 
-The node will appear as **pending** in the server admin dashboard. An admin must approve it before it becomes operational. After approval, assign a radio system in the dashboard and the node will start decoding automatically.
+Mint the `--token` at **Settings → Nodes** in the web app (the panel prints the
+whole command). Run `install.sh --help` for every flag; each also has a
+`DRB_*` env var. `--build` compiles op25 on the Pi (~1h) instead of pulling.
+
+### Local dev / manual
+
+```bash
+make setup            # seeds .env from .env.example
+nano .env             # at minimum: NODE_ID, MQTT_BROKER, C2_URL
+make up               # build locally (op25 ~10-15 min first time)
+# or: make up-prebuilt # pull images, no local build
+```
+
+The node appears as **pending** in the admin dashboard. An admin approves it,
+then assigns a radio system, and the node starts decoding automatically.
 
 ## Environment Variables (`.env`)
 
@@ -167,7 +178,7 @@ The node will appear as **pending** in the server admin dashboard. An admin must
 | `ICECAST_HOST` | No | `localhost` | Icecast hostname (leave as localhost — host network mode) |
 | `ICECAST_PORT` | No | `8000` | Icecast HTTP port |
 | `ICECAST_MOUNT` | No | `/radio` | Icecast mount point |
-| `ICECAST_SOURCE_PASSWORD` | **Yes** | none | Icecast source password. No default — the container refuses to start without it. `setup.sh` generates one; otherwise `openssl rand -base64 24` |
+| `ICECAST_SOURCE_PASSWORD` | **Yes** | none | Icecast source password. No default — the container refuses to start without it. `install.sh` generates one; otherwise `openssl rand -base64 24` |
 | `ICECAST_ADMIN_PASSWORD` | **Yes** | none | Icecast admin password. Same rules |
 | `OP25_API_URL` | No | `http://localhost:8001` | OP25 container HTTP API |
 | `OP25_TERMINAL_URL` | No | `http://localhost:8081` | OP25 HTTP terminal (live talkgroup metadata) |

docker-compose.yml

@@ -32,6 +32,21 @@ services:
     depends_on:
       - icecast
 
+  # Claims the node's SECOND physical SDR (op25 always claims the first).
+  # Only useful if secondary_sdr_mode is set to adsb|ais via the edge-node
+  # config; otherwise it just sits idle answering /secondary/status. See
+  # node-26#9. Same network/device access as op25 for the same reason: it
+  # needs the raw USB device, not a virtualized one.
+  secondary-sdr:
+    image: ${IMAGE_REGISTRY:-git.vpn.cusano.net}/${DOCKER_ORG:-logan}/${DOCKER_REPO:-node-26}/secondary-sdr:latest
+    build: ./secondary-sdr-container
+    restart: unless-stopped
+    privileged: true
+    network_mode: host
+    env_file: .env
+    volumes:
+      - /dev:/dev
+
   edge-node:
     image: ${IMAGE_REGISTRY:-git.vpn.cusano.net}/${DOCKER_ORG:-logan}/${DOCKER_REPO:-node-26}/edge-node:latest
     build: ./drb-edge-node

drb-edge-node/app/config.py

@@ -136,6 +136,9 @@ class Settings(BaseSettings):
     op25_api_url: str = "http://localhost:8001"
     op25_terminal_url: str = "http://localhost:8081"
 
+    # Secondary SDR container (node-26#9) — ADS-B / AIS on a second SDR
+    secondary_sdr_api_url: str = "http://localhost:8002"
+
     # Paths (volume mounts)
     config_path: str = "/configs"
     recordings_path: str = "/recordings"

drb-edge-node/app/internal/mqtt_manager.py

@@ -213,7 +213,9 @@ class MQTTManager:
     async def _publish_checkin(self):
         from app.internal.discord_radio import radio_bot
         from app.internal.config_manager import load_node_config
+        from app.internal.op25_client import op25_client
         config = load_node_config()
+        devices = await op25_client.devices()
         payload = {
             "node_id": settings.node_id,
             "name": settings.node_name,
@@ -225,7 +227,12 @@ class MQTTManager:
             "is_overridden": config.override_system_id is not None and config.node_type != "portable",
             "override_system_id": config.override_system_id,
             "enforce_override_timeout": config.enforce_override_timeout,
+            "secondary_sdr_mode": config.secondary_sdr_mode,
         }
+        # Best-effort — the first node-initiated hardware-report field. Omit
+        # rather than guess if op25's control API is unreachable.
+        if devices is not None:
+            payload["sdr_count"] = devices.get("count")
         self._publish(self._t_checkin, payload, qos=1)
 
     def _publish(self, topic: str, payload: dict, qos: int = 0, retain: bool = False):

drb-edge-node/app/internal/op25_client.py

@@ -65,6 +65,16 @@ class OP25Client:
             logger.error(f"OP25 status failed: {e}")
             return None
 
+    async def devices(self) -> Optional[Dict[str, Any]]:
+        try:
+            async with httpx.AsyncClient(timeout=5) as client:
+                r = await client.get(f"{self.api_url}/op25/devices")
+                r.raise_for_status()
+                return r.json()
+        except Exception as e:
+            logger.error(f"OP25 device enumeration failed: {e}")
+            return None
+
     async def generate_config(self, config: Dict[str, Any]) -> bool:
         try:
             async with httpx.AsyncClient(timeout=10) as client:

drb-edge-node/app/internal/secondary_sdr_client.py

@@ -0,0 +1,59 @@
+import httpx
+from typing import Any, Dict, Optional
+from app.config import settings
+from app.internal.logger import logger
+
+
+class SecondarySdrClient:
+    """Talks to the secondary-sdr-container (node-26#9) over its control API.
+
+    Mirrors op25_client.py's shape on purpose — same failure handling (log
+    and return None/False rather than raise), since this container is
+    optional and its absence must never break the primary op25 radio path.
+    """
+
+    def __init__(self):
+        self.api_url = settings.secondary_sdr_api_url
+
+    async def start(self, mode: str) -> bool:
+        try:
+            async with httpx.AsyncClient(timeout=10) as client:
+                r = await client.post(f"{self.api_url}/secondary/start", json={"mode": mode})
+                r.raise_for_status()
+                return True
+        except Exception as e:
+            logger.error(f"Secondary SDR start (mode={mode!r}) failed: {e}")
+            return False
+
+    async def stop(self) -> bool:
+        try:
+            async with httpx.AsyncClient(timeout=10) as client:
+                r = await client.post(f"{self.api_url}/secondary/stop")
+                r.raise_for_status()
+                return True
+        except Exception as e:
+            logger.error(f"Secondary SDR stop failed: {e}")
+            return False
+
+    async def status(self) -> Optional[Dict[str, Any]]:
+        try:
+            async with httpx.AsyncClient(timeout=5) as client:
+                r = await client.get(f"{self.api_url}/secondary/status")
+                r.raise_for_status()
+                return r.json()
+        except Exception as e:
+            logger.error(f"Secondary SDR status failed: {e}")
+            return None
+
+    async def data(self) -> Optional[Dict[str, Any]]:
+        try:
+            async with httpx.AsyncClient(timeout=5) as client:
+                r = await client.get(f"{self.api_url}/secondary/data")
+                r.raise_for_status()
+                return r.json()
+        except Exception as e:
+            logger.error(f"Secondary SDR data fetch failed: {e}")
+            return None
+
+
+secondary_sdr_client = SecondarySdrClient()

drb-edge-node/app/internal/telemetry_uplink.py

@@ -0,0 +1,44 @@
+import asyncio
+
+import httpx
+
+from app.config import settings
+from app.internal import credentials
+from app.internal.config_manager import load_node_config
+from app.internal.logger import logger
+from app.internal.secondary_sdr_client import secondary_sdr_client
+
+# How often the second-SDR decoder's current snapshot is forwarded to C2
+# (node-26#9). This is a live-map overlay, not a flight/vessel history, so
+# there is no backlog/retry on a missed tick — the next one supersedes it.
+UPLINK_INTERVAL_SECONDS = 10
+
+
+async def _post_snapshot(path: str, body: dict) -> None:
+    if not settings.c2_url:
+        return
+    api_key = credentials.get_api_key()
+    if not api_key:
+        return
+    headers = {"Authorization": f"Bearer {api_key}"}
+    try:
+        async with httpx.AsyncClient(timeout=10) as client:
+            r = await client.post(f"{settings.c2_url}{path}", json=body, headers=headers)
+            r.raise_for_status()
+    except Exception as e:
+        logger.debug(f"Telemetry uplink to {path} failed: {e}")
+
+
+async def telemetry_uplink_loop():
+    while True:
+        await asyncio.sleep(UPLINK_INTERVAL_SECONDS)
+        config = load_node_config()
+        if config.secondary_sdr_mode not in ("adsb", "ais"):
+            continue
+        snapshot = await secondary_sdr_client.data()
+        if not snapshot:
+            continue
+        if config.secondary_sdr_mode == "adsb" and snapshot.get("aircraft"):
+            await _post_snapshot("/telemetry/adsb", {"aircraft": snapshot["aircraft"]})
+        elif config.secondary_sdr_mode == "ais" and snapshot.get("vessels"):
+            await _post_snapshot("/telemetry/ais", {"vessels": snapshot["vessels"]})

drb-edge-node/app/main.py

@@ -224,6 +224,7 @@ async def on_config_push(payload: dict):
     hardware_preset = payload.pop("hardware_preset", None)
     ppm_override = payload.pop("ppm_override", None)
     node_type = payload.pop("node_type", None)
+    secondary_sdr_mode = payload.pop("secondary_sdr_mode", None)
     enforce_override_timeout = payload.pop("enforce_override_timeout", None)
     try:
         config = SystemConfig(**payload)
@@ -243,6 +244,8 @@ async def on_config_push(payload: dict):
         node_cfg.ppm_override = float(ppm_override)
     if node_type is not None:
         node_cfg.node_type = node_type
+    if secondary_sdr_mode is not None:
+        node_cfg.secondary_sdr_mode = secondary_sdr_mode
     if enforce_override_timeout is not None:
         node_cfg.enforce_override_timeout = bool(enforce_override_timeout)
     save_node_config(node_cfg)
@@ -257,6 +260,13 @@ async def on_config_push(payload: dict):
     await op25_client.start()
     logger.info(f"Config push applied: {config.name}")
 
+    if secondary_sdr_mode is not None:
+        from app.internal.secondary_sdr_client import secondary_sdr_client
+        if secondary_sdr_mode in ("adsb", "ais"):
+            await secondary_sdr_client.start(secondary_sdr_mode)
+        else:
+            await secondary_sdr_client.stop()
+
 
 # ---------------------------------------------------------------------------
 # App lifecycle
@@ -312,12 +322,20 @@ async def lifespan(app: FastAPI):
             logger.warning(f"OP25 not ready yet (attempt {attempt + 1}/10), retrying in 3s…")
             await asyncio.sleep(3)
 
+    if node_cfg.secondary_sdr_mode in ("adsb", "ais"):
+        from app.internal.secondary_sdr_client import secondary_sdr_client
+        logger.info(f"Resuming secondary SDR (mode={node_cfg.secondary_sdr_mode!r}) after restart.")
+        await secondary_sdr_client.start(node_cfg.secondary_sdr_mode)
+
     heartbeat_task = asyncio.create_task(mqtt_manager.heartbeat_loop())
+    from app.internal.telemetry_uplink import telemetry_uplink_loop
+    telemetry_task = asyncio.create_task(telemetry_uplink_loop())
 
     yield  # --- app running ---
 
     logger.info("Edge node shutting down.")
     heartbeat_task.cancel()
+    telemetry_task.cancel()
     await metadata_watcher.stop()
     await call_recorder.stop()
     await radio_bot.stop()

drb-edge-node/app/models.py

@@ -34,6 +34,7 @@ class NodeConfig(BaseModel):
     hardware_preset: str = "rtl-sdr-v3"
     ppm_override: Optional[float] = None
     node_type: str = "fixed"  # fixed or portable
+    secondary_sdr_mode: str = "none"  # none | adsb | ais | op25_2 — requires a second physical SDR
     enforce_override_timeout: bool = True
     override_system_id: Optional[str] = None
     override_config: Optional[SystemConfig] = None

install.sh

@@ -0,0 +1,538 @@
+#!/usr/bin/env bash
+#
+# DRB edge node — one-shot bootstrap for a clean Raspberry Pi OS (arm64).
+#
+#   curl -fsSL https://git.vpn.cusano.net/logan/node-26/raw/tag/v1/install.sh \
+#     | sudo bash -s -- --token DRB-xxxx --node-id node-003 \
+#         --c2-url https://api.<domain> --mqtt-broker mqtt.<domain>
+#
+# (fetch install.sh from the same tag it installs; use raw/branch/main with
+#  --track-main for the owner's own always-latest nodes)
+#
+# Hosting, the pinned ref, and setup.sh's retirement are settled (owner
+# decisions, 2026-09-06). One standing hazard remains — D3 below.
+#
+# What it does, in order:
+#   1. Preflight (root, arch, apt, SDR present)
+#   2. Install Docker + compose plugin + git + curl + jq
+#   3. Clone logan/node-26 at a PINNED ref into $INSTALL_DIR
+#   4. Write .env (non-interactive from flags/env, interactive fallback)
+#   5. Enroll with C2 (POST /nodes/enroll) and poll for the api_key
+#   6. docker compose pull && up -d   (prebuilt; --build opts into the ~1h build)
+#   7. Print the approval step
+#
+# It does NOT set up WireGuard. WireGuard-per-node was evaluated and rejected
+# (Server/MQTT-PUBLIC-AUTH-PLAN.md, Server/infra/main.tf:67-73). A field node
+# reaches production over the public internet only:
+#     https://api.<domain>      enrollment + /upload   (Caddy, real TLS)
+#     mqtt.<domain>:8883        MQTT over TLS, username=NODE_ID password=api_key
+# The two stale "nodes reach it via WireGuard" comments in
+# Server/docker-compose.prod.yml:6 and Server/infra/main.tf:69 are leftovers.
+#
+# ---------------------------------------------------------------------------
+# SETTLED (owner decisions, 2026-09-06 — node-26#4)
+#
+#   D1  HOSTING. git.vpn.cusano.net is PUBLIC — it is a CNAME to
+#       cusano-net.duckdns.org (71.117.95.129) with a real Let's Encrypt cert,
+#       resolvable from any public resolver. install.sh, `git clone` and
+#       `docker compose pull` all work from a customer's Pi with no VPN.
+#       Caveat, not a blocker: that IP is a dynamic-DNS record on the owner's
+#       home uplink, so it is a single point of failure and a bandwidth limit
+#       — fine for the beachhead, revisit before scaling node count.
+#
+#   D2  PIN. node-26 gets a `v1` tag (owner cuts it — see the git command in
+#       the mint panel / node-26#4). DEFAULT_REF below is `v1`. `--track-main`
+#       stays as an opt-in for the owner's own nodes.
+#
+# STANDING HAZARD
+#
+#   D3  SOURCE-OVERLAY. docker-compose.yml bind-mounts ./drb-edge-node/app and
+#       ./op25-container/app OVER the image's /app. So even in prebuilt mode
+#       the running Python is the CLONED REF's code against the pulled image's
+#       dependencies. `v1` == the commit CI built the current :latest/:stable
+#       from, so today they match — but the moment `v1` and the image tags
+#       diverge this silently mixes them. Fix: drop those two mounts from the
+#       prod compose path, or always retag images from the same ref as `v1`.
+# ---------------------------------------------------------------------------
+set -euo pipefail
+
+# ── Defaults ────────────────────────────────────────────────────────────────
+DEFAULT_REF="v1"                                                  # D2
+DEFAULT_REPO_URL="https://git.vpn.cusano.net/logan/node-26.git"   # D1 (public)
+DEFAULT_INSTALL_DIR="/opt/drb/node-26"
+
+REPO_URL="${DRB_REPO_URL:-$DEFAULT_REPO_URL}"
+REF="${DRB_REF:-$DEFAULT_REF}"
+INSTALL_DIR="${DRB_INSTALL_DIR:-$DEFAULT_INSTALL_DIR}"
+
+NODE_ID="${DRB_NODE_ID:-}"
+NODE_NAME="${DRB_NODE_NAME:-}"
+NODE_LAT="${DRB_NODE_LAT:-}"
+NODE_LON="${DRB_NODE_LON:-}"
+C2_URL="${DRB_C2_URL:-}"
+MQTT_BROKER="${DRB_MQTT_BROKER:-}"
+MQTT_PORT="${DRB_MQTT_PORT:-8883}"
+MQTT_TLS="${DRB_MQTT_TLS:-true}"
+ENROLLMENT_TOKEN="${DRB_ENROLLMENT_TOKEN:-}"
+DASHBOARD_USER="${DRB_DASHBOARD_USERNAME:-admin}"
+DASHBOARD_PASS="${DRB_DASHBOARD_PASSWORD:-}"
+REGISTRY="${DRB_IMAGE_REGISTRY:-git.vpn.cusano.net}"   # D1 (public host)
+DOCKER_ORG="${DRB_DOCKER_ORG:-logan}"
+DOCKER_REPO="${DRB_DOCKER_REPO:-node-26}"
+REGISTRY_USER="${DRB_REGISTRY_USER:-}"
+REGISTRY_PASS="${DRB_REGISTRY_PASS:-}"
+
+DO_BUILD=0        # 0 = pull prebuilt images (default), 1 = build on the Pi (~1h for op25)
+DO_START=1
+ASSUME_YES=0
+ENROLL_WAIT="${DRB_ENROLL_WAIT:-0}"   # seconds to block waiting for admin approval; 0 = don't block
+
+C='\033[0;36m'; G='\033[0;32m'; Y='\033[1;33m'; R='\033[0;31m'; N='\033[0m'
+say()  { printf "${C}==>${N} %s\n" "$*"; }
+ok()   { printf "${G}  ok${N} %s\n" "$*"; }
+warn() { printf "${Y}  !!${N} %s\n" "$*" >&2; }
+die()  { printf "${R}error:${N} %s\n" "$*" >&2; exit 1; }
+
+usage() {
+  cat <<'USAGE'
+Usage: install.sh [options]
+
+  --token TOKEN        Enrollment token (Settings -> Nodes -> New token)
+  --node-id ID         Unique node id, e.g. node-003
+  --name NAME          Display name (default: node id)
+  --lat N --lon N      Decimal degrees for the map
+  --c2-url URL         e.g. https://api.drb.example.net
+  --mqtt-broker HOST   e.g. mqtt.drb.example.net
+  --mqtt-port N        default 8883
+  --no-tls             plaintext MQTT (LAN/dev brokers only)
+  --dashboard-pass PW  local dashboard password (generated if omitted)
+  --ref REF            git ref to install (default: v1)
+  --track-main         install main HEAD instead of the v1 tag
+  --dir PATH           install location (default /opt/drb/node-26)
+  --build              build images locally instead of pulling (~1h for op25)
+  --no-start           configure and enroll, but do not start containers
+  --wait-approval SEC  block up to SEC seconds polling for admin approval
+  -y, --yes            never prompt; fail instead of asking
+
+Every option also has an env var: DRB_NODE_ID, DRB_C2_URL, DRB_ENROLLMENT_TOKEN,
+DRB_MQTT_BROKER, DRB_REF, DRB_INSTALL_DIR, DRB_REGISTRY_USER/PASS, ...
+Secrets are read from the environment or prompted on the TTY, never from a pipe.
+USAGE
+}
+
+while [ $# -gt 0 ]; do
+  case "$1" in
+    --token)          ENROLLMENT_TOKEN="$2"; shift 2 ;;
+    --node-id)        NODE_ID="$2"; shift 2 ;;
+    --name)           NODE_NAME="$2"; shift 2 ;;
+    --lat)            NODE_LAT="$2"; shift 2 ;;
+    --lon)            NODE_LON="$2"; shift 2 ;;
+    --c2-url)         C2_URL="$2"; shift 2 ;;
+    --mqtt-broker)    MQTT_BROKER="$2"; shift 2 ;;
+    --mqtt-port)      MQTT_PORT="$2"; shift 2 ;;
+    --no-tls)         MQTT_TLS=false; [ "$MQTT_PORT" = 8883 ] && MQTT_PORT=1883; shift ;;
+    --dashboard-pass) DASHBOARD_PASS="$2"; shift 2 ;;
+    --ref)            REF="$2"; shift 2 ;;
+    --track-main)     REF="main"; shift ;;
+    --dir)            INSTALL_DIR="$2"; shift 2 ;;
+    --build)          DO_BUILD=1; shift ;;
+    --no-start)       DO_START=0; shift ;;
+    --wait-approval)  ENROLL_WAIT="$2"; shift 2 ;;
+    -y|--yes)         ASSUME_YES=1; shift ;;
+    -h|--help)        usage; exit 0 ;;
+    *)                die "unknown option: $1 (try --help)" ;;
+  esac
+done
+
+# Prompts must come from the terminal, not from the `curl |` pipe on stdin.
+ask() {  # ask VAR "prompt" "default"
+  local __v="$1" __p="$2" __d="${3:-}" __r=""
+  if [ "$ASSUME_YES" = 1 ] || [ ! -r /dev/tty ]; then
+    [ -n "$__d" ] || die "$__p is required (non-interactive: pass the flag or env var)"
+    printf -v "$__v" '%s' "$__d"; return
+  fi
+  read -rp "$__p${__d:+ [$__d]}: " __r </dev/tty
+  printf -v "$__v" '%s' "${__r:-$__d}"
+}
+ask_secret() {
+  local __v="$1" __p="$2" __r=""
+  if [ "$ASSUME_YES" = 1 ] || [ ! -r /dev/tty ]; then printf -v "$__v" '%s' ''; return; fi
+  read -rsp "$__p: " __r </dev/tty; echo >/dev/tty
+  printf -v "$__v" '%s' "$__r"
+}
+genpw() { head -c 24 /dev/urandom | base64 | tr -d '\n=' ; }
+
+# ── 1. Preflight ────────────────────────────────────────────────────────────
+say "Preflight"
+[ "$(id -u)" -eq 0 ] || die "run as root: curl -fsSL <url> | sudo bash -s -- ..."
+command -v apt-get >/dev/null || die "apt-get not found — this script targets Raspberry Pi OS / Debian"
+
+ARCH="$(dpkg --print-architecture)"
+case "$ARCH" in
+  arm64|aarch64) ok "arch $ARCH" ;;
+  *) warn "arch is $ARCH — CI only builds linux/arm64 images. Prebuilt pull will fail; use --build." ;;
+esac
+ok "running as root"
+
+# Not fatal: the dongle can be plugged in after install.
+if command -v lsusb >/dev/null 2>&1 && lsusb | grep -qiE 'rtl2838|realtek.*283[28]|sdr'; then
+  ok "SDR dongle detected on USB"
+else
+  warn "no RTL-SDR dongle detected on USB — plug one in before expecting audio"
+fi
+
+# ── 2. Dependencies ─────────────────────────────────────────────────────────
+say "Installing dependencies"
+export DEBIAN_FRONTEND=noninteractive
+apt-get update -qq
+apt-get install -y -qq git curl ca-certificates jq usbutils openssl >/dev/null
+ok "git curl jq openssl"
+
+if ! command -v docker >/dev/null 2>&1; then
+  say "Installing Docker (get.docker.com)"
+  curl -fsSL https://get.docker.com | sh
+fi
+docker --version >/dev/null || die "docker install failed"
+ok "$(docker --version)"
+
+if ! docker compose version >/dev/null 2>&1; then
+  apt-get install -y -qq docker-compose-plugin >/dev/null
+fi
+docker compose version >/dev/null 2>&1 || die "docker compose plugin missing"
+ok "$(docker compose version --short 2>/dev/null || echo 'compose plugin')"
+
+systemctl enable --now docker >/dev/null 2>&1 || true
+
+# The docker group only matters for the human who logs in LATER — this script
+# is already root, so nothing below needs a re-login. setup.sh's bug (add the
+# group, then immediately run compose in the same unprivileged shell) does not
+# apply here.
+TARGET_USER="${SUDO_USER:-}"
+if [ -n "$TARGET_USER" ] && [ "$TARGET_USER" != root ]; then
+  usermod -aG docker "$TARGET_USER" || true
+  ok "added '$TARGET_USER' to the docker group (takes effect at their next login)"
+fi
+
+# ── 3. Fetch the repo at a pinned ref ───────────────────────────────────────
+say "Fetching node-26 @ ${REF}"
+mkdir -p "$(dirname "$INSTALL_DIR")"
+if [ -d "$INSTALL_DIR/.git" ]; then
+  ok "existing install at $INSTALL_DIR — updating in place (.env is preserved)"
+  git -C "$INSTALL_DIR" remote set-url origin "$REPO_URL"
+  git -C "$INSTALL_DIR" fetch --tags --prune origin
+else
+  git clone --no-checkout "$REPO_URL" "$INSTALL_DIR"
+fi
+git -C "$INSTALL_DIR" -c advice.detachedHead=false checkout --force "$REF"
+RESOLVED_SHA="$(git -C "$INSTALL_DIR" rev-parse HEAD)"
+ok "checked out $REF ($RESOLVED_SHA)"
+[ "$REF" = main ] && warn "tracking main — two nodes installed on different days run different software"
+
+cd "$INSTALL_DIR"
+mkdir -p configs recordings
+chmod 700 configs
+
+# ── 4. Configuration ────────────────────────────────────────────────────────
+say "Configuring"
+if [ -f .env ]; then
+  ok ".env already present — keeping it (delete it to reconfigure)"
+  # Re-read the three values section 5 needs. Not `source .env` — that would
+  # execute whatever is in the file.
+  envget() { grep -E "^$1=" .env | head -1 | cut -d= -f2- | tr -d '"'; }
+  NODE_ID="$(envget NODE_ID)"
+  C2_URL="${C2_URL:-$(envget C2_URL)}"; C2_URL="${C2_URL%/}"
+  NODE_NAME="${NODE_NAME:-$(envget NODE_NAME)}"
+  NODE_LAT="${NODE_LAT:-$(envget NODE_LAT)}"
+  NODE_LON="${NODE_LON:-$(envget NODE_LON)}"
+  DASHBOARD_USER="$(envget DASHBOARD_USERNAME)"
+  [ -n "$NODE_ID" ] || die ".env exists but has no NODE_ID — fix or delete it"
+else
+  [ -n "$NODE_ID" ] || ask NODE_ID "Node ID (e.g. node-003)"
+  [[ "$NODE_ID" =~ ^[A-Za-z0-9_-]+$ ]] || die "NODE_ID must be letters/numbers/dash/underscore only"
+  [ -n "$NODE_NAME" ] || ask NODE_NAME "Display name" "$NODE_ID"
+  [ -n "$NODE_LAT" ]  || ask NODE_LAT  "Latitude"  "0.0"
+  [ -n "$NODE_LON" ]  || ask NODE_LON  "Longitude" "0.0"
+  [ -n "$C2_URL" ]    || ask C2_URL    "C2 API base URL (https://api.<domain>)"
+  C2_URL="${C2_URL%/}"
+  [ -n "$MQTT_BROKER" ] || ask MQTT_BROKER "MQTT broker host (mqtt.<domain>)"
+
+  if [ -z "$DASHBOARD_PASS" ]; then
+    ask_secret DASHBOARD_PASS "Local dashboard password (Enter to generate)"
+    [ -n "$DASHBOARD_PASS" ] || { DASHBOARD_PASS="$(genpw)"; GENERATED_DASH=1; }
+  fi
+  ICE_SRC="$(genpw)"; ICE_ADM="$(genpw)"
+
+  umask 077
+  cat > .env <<EOF
+# Written by install.sh on $(date -Is) from ref ${RESOLVED_SHA}
+NODE_ID=${NODE_ID}
+NODE_NAME="${NODE_NAME}"
+NODE_LAT=${NODE_LAT}
+NODE_LON=${NODE_LON}
+
+# MQTT — post-cutover auth. There is NO shared node login: the node
+# authenticates as username=NODE_ID, password=<its C2-issued api_key>, which
+# section 5 below fetches into configs/credentials.json. Deliberately no
+# MQTT_USER/MQTT_PASS here; a dynsec broker rejects them.
+MQTT_BROKER=${MQTT_BROKER}
+MQTT_PORT=${MQTT_PORT}
+MQTT_TLS=${MQTT_TLS}
+
+C2_URL=${C2_URL}
+
+ICECAST_SOURCE_PASSWORD=${ICE_SRC}
+ICECAST_ADMIN_PASSWORD=${ICE_ADM}
+ICECAST_HOST=localhost
+ICECAST_PORT=8000
+ICECAST_MOUNT=/radio
+
+DASHBOARD_USERNAME=${DASHBOARD_USER}
+DASHBOARD_PASSWORD=${DASHBOARD_PASS}
+
+PULSE_SOURCE=drb_sink.monitor
+OP25_API_URL=http://localhost:8001
+OP25_TERMINAL_URL=http://localhost:8081
+OP25_DEBUG_EXPOSE=false
+
+IMAGE_REGISTRY=${REGISTRY}
+DOCKER_ORG=${DOCKER_ORG}
+DOCKER_REPO=${DOCKER_REPO}
+EOF
+  umask 022
+  chmod 600 .env
+  [ -n "$TARGET_USER" ] && chown "$TARGET_USER" .env 2>/dev/null || true
+  ok ".env written for '$NODE_ID'"
+fi
+
+# ── 5. Enrollment ───────────────────────────────────────────────────────────
+# Client half of Server/drb-c2-core/app/routers/enrollment.py. It does NOT
+# exist in the edge-node app today (mqtt_manager.py:73-85 says so explicitly),
+# so without this section a fresh node can never obtain an api_key against a
+# dynsec broker: MQTT needs the key, and the legacy key-over-MQTT delivery
+# needs MQTT. Doing it here breaks that loop.
+#
+# Two server endpoints, and the exact response shapes verified against
+# enrollment.py @ v1:
+#
+#   POST /nodes/enroll   (X-Enrollment-Token)
+#     200 -> {node_id, pickup_secret, approval_status}
+#     403 -> node_id is ALREADY APPROVED. The CRITICAL GUARD in enrollment.py
+#            refuses to mint a fresh pickup_secret off the shared fleet token.
+#            So we must only ever POST this for a node we have not enrolled
+#            from this machine before — i.e. when configs/pickup_secret is
+#            absent. Re-running the installer must NOT re-POST here.
+#     401 bad/revoked token · 400 missing node_id · 429 rate limited
+#
+#   GET /nodes/{id}/credentials   (X-Pickup-Secret)
+#     Always HTTP 200 with {approval_status, api_key} unless the secret or
+#     node is bad. api_key is null until an admin approves the node in the UI
+#     (nodes.py approve_node() mints node_keys/{id}.api_key synchronously in
+#     the same call — approve is enough; assigning a system is independent and
+#     NOT required for a key). This endpoint has NO already-approved guard, so
+#     it is the correct — and only working — re-run path after approval.
+#     401 -> missing/invalid/rotated pickup secret
+#     404 -> node unknown to C2 (deleted server-side, or never enrolled)
+CREDS="$INSTALL_DIR/configs/credentials.json"
+PICKUP_FILE="$INSTALL_DIR/configs/pickup_secret"
+
+# GET /nodes/{id}/credentials. Sets CRED_HTTP + CRED_BODY (no -f: we need the
+# body and status on a 4xx). One implementation so first-run and re-run agree.
+creds_pickup() {  # creds_pickup PICKUP_SECRET
+  local _tmp; _tmp="$(mktemp)"
+  CRED_HTTP="$(curl -sS -o "$_tmp" -w '%{http_code}' \
+      "$C2_URL/nodes/$NODE_ID/credentials" -H "X-Pickup-Secret: $1" 2>/dev/null || echo 000)"
+  CRED_BODY="$(cat "$_tmp" 2>/dev/null || true)"
+  rm -f "$_tmp"
+}
+cred_field() { printf '%s' "${CRED_BODY:-}" | jq -r "$1 // empty" 2>/dev/null || true; }
+
+write_creds() {  # write_creds API_KEY
+  umask 077; jq -n --arg k "$1" '{api_key:$k}' > "$CREDS"; umask 022
+  ok "api_key received and written to configs/credentials.json"
+}
+
+say_pending() {  # say_pending APPROVAL_STATUS  — not an error: node is enrolled, key not minted yet
+  warn "not approved yet — C2 reports approval_status=${1:-pending}, no api_key minted."
+  warn "an admin must, at  <app-url>/settings/nodes :  Approve '$NODE_ID'  (assigning a system is separate)."
+  warn "then re-run this installer — it reuses configs/pickup_secret — or fetch it directly:"
+  warn "  curl -fsS $C2_URL/nodes/$NODE_ID/credentials -H \"X-Pickup-Secret: \$(cat $PICKUP_FILE)\" | jq -r .api_key"
+}
+
+# Poll creds_pickup for up to ENROLL_WAIT seconds while still pending. Result
+# left in CRED_HTTP/CRED_BODY. --wait-approval is what would have avoided the
+# original prod bug; the default (0) does not block, so the re-run path below
+# must stand on its own.
+wait_for_key() {  # wait_for_key PICKUP_SECRET
+  [ "${ENROLL_WAIT:-0}" -gt 0 ] || return 0
+  local _end; _end=$(( $(date +%s) + ENROLL_WAIT ))
+  say "Waiting up to ${ENROLL_WAIT}s for an admin to approve '$NODE_ID'"
+  while [ "$(date +%s)" -lt "$_end" ]; do
+    sleep 10
+    creds_pickup "$1"
+    [ "$CRED_HTTP" = 200 ] || return 0
+    [ -z "$(cred_field '.api_key')" ] || return 0
+  done
+}
+
+do_fresh_enroll() {
+  say "Enrolling '$NODE_ID' with $C2_URL"
+  [ -n "$ENROLLMENT_TOKEN" ] || ask_secret ENROLLMENT_TOKEN "Enrollment token"
+  [ -n "$ENROLLMENT_TOKEN" ] || die "no enrollment token — mint one at Settings -> Nodes, then re-run with --token"
+
+  local BODY RESP PICKUP STATUS KEY
+  BODY="$(jq -nc --arg id "$NODE_ID" --arg n "${NODE_NAME:-$NODE_ID}" \
+            --argjson lat "${NODE_LAT:-0}" --argjson lon "${NODE_LON:-0}" \
+            '{node_id:$id,name:$n,lat:$lat,lon:$lon}')"
+  # Token goes in a header from a shell variable — never on a process command
+  # line, never echoed.
+  if ! RESP="$(curl -fsS -X POST "$C2_URL/nodes/enroll" \
+            -H "Content-Type: application/json" \
+            -H "X-Enrollment-Token: $ENROLLMENT_TOKEN" \
+            --data "$BODY" 2>&1)"; then
+    case "$RESP" in
+      *403*) die "enroll refused (403): node '$NODE_ID' is already approved on C2, and
+  this machine has no configs/pickup_secret to collect its key with. A token
+  alone cannot re-issue an approved node's key (enrollment.py CRITICAL GUARD).
+  Recover by restoring this node's original configs/pickup_secret and re-running,
+  or have an admin Reissue key (Settings -> Nodes) and write the key into
+  $CREDS by hand (see node-26#6)." ;;
+      *401*) die "enroll refused (401): enrollment token missing/invalid/revoked —
+  mint a fresh one at Settings -> Nodes and re-run with --token." ;;
+      *429*) die "enroll refused (429): rate limited. Wait ~1 minute, then re-run." ;;
+      *)     die "enroll failed: $RESP" ;;
+    esac
+  fi
+  PICKUP="$(printf '%s' "$RESP" | jq -r '.pickup_secret')"
+  STATUS="$(printf '%s' "$RESP" | jq -r '.approval_status')"
+  [ -n "$PICKUP" ] && [ "$PICKUP" != null ] || die "enroll returned no pickup_secret: $RESP"
+
+  umask 077; printf '%s' "$PICKUP" > "$PICKUP_FILE"; umask 022
+  ok "enrolled — approval_status=$STATUS (pickup secret saved to configs/pickup_secret)"
+
+  creds_pickup "$PICKUP"
+  [ "$CRED_HTTP" = 200 ] || die "post-enroll credential fetch failed (HTTP $CRED_HTTP): ${CRED_BODY:-<no body>}"
+  KEY="$(cred_field '.api_key')"
+  if [ -z "$KEY" ]; then
+    wait_for_key "$PICKUP" || true
+    KEY="$(cred_field '.api_key')"
+  fi
+  if [ -n "$KEY" ]; then
+    write_creds "$KEY"
+  else
+    say_pending "$(cred_field '.approval_status')"
+  fi
+}
+
+if [ -s "$CREDS" ] && jq -e '.api_key // empty' "$CREDS" >/dev/null 2>&1; then
+  say "Enrollment"
+  ok "api_key already on disk — skipping enrollment"
+elif [ -z "${C2_URL:-}" ]; then
+  say "Enrollment"
+  warn "no C2_URL — skipping enrollment"
+elif [ -s "$PICKUP_FILE" ]; then
+  # RE-RUN. This node already enrolled from this machine. Do NOT POST
+  # /nodes/enroll again — an approved node_id gets 403 there, and the v1
+  # installer's own "re-run to pick up the key" advice then dead-ends on
+  # "use Reissue key". The pickup endpoint has no such guard: use it.
+  say "Enrollment — collecting credentials for '$NODE_ID' (pickup secret from a previous run)"
+  PICKUP="$(cat "$PICKUP_FILE")"
+  creds_pickup "$PICKUP"
+  case "$CRED_HTTP" in
+    200)
+      API_KEY="$(cred_field '.api_key')"
+      if [ -z "$API_KEY" ]; then
+        wait_for_key "$PICKUP" || true
+        API_KEY="$(cred_field '.api_key')"
+      fi
+      if [ -n "$API_KEY" ]; then
+        write_creds "$API_KEY"
+      else
+        # Still pending. Enrolled and idempotent — next run collects the key.
+        # Clean exit, fall through to start the stack. NOT a failure.
+        say_pending "$(cred_field '.approval_status')"
+      fi
+      ;;
+    401)
+      if [ -n "$ENROLLMENT_TOKEN" ]; then
+        warn "saved pickup secret rejected (401) — likely rotated by a re-enroll elsewhere. Re-enrolling with --token."
+        rm -f "$PICKUP_FILE"
+        do_fresh_enroll
+      else
+        die "saved pickup secret is stale (401) and no --token was given. Re-run with
+  --token DRB-… to re-enroll (only works while the node is still pending), or
+  have an admin Reissue key for an approved node and write $CREDS by hand."
+      fi
+      ;;
+    404)
+      if [ -n "$ENROLLMENT_TOKEN" ]; then
+        warn "C2 does not know node '$NODE_ID' (404) — deleted server-side or never fully enrolled. Re-enrolling with --token."
+        rm -f "$PICKUP_FILE"
+        do_fresh_enroll
+      else
+        die "C2 does not know node '$NODE_ID' (404) and no --token was given.
+  Re-run with --token DRB-… to enroll it again."
+      fi
+      ;;
+    000)
+      die "could not reach $C2_URL/nodes/$NODE_ID/credentials — check --c2-url and connectivity." ;;
+    *)
+      die "credential pickup failed (HTTP $CRED_HTTP): ${CRED_BODY:-<no body>}" ;;
+  esac
+else
+  say "Enrollment"
+  do_fresh_enroll
+fi
+
+# ── 6. Images + start ───────────────────────────────────────────────────────
+if [ "$DO_START" = 1 ]; then
+  if [ -n "$REGISTRY_USER" ] && [ -n "$REGISTRY_PASS" ]; then
+    printf '%s' "$REGISTRY_PASS" | docker login "$REGISTRY" -u "$REGISTRY_USER" --password-stdin >/dev/null
+    ok "logged in to $REGISTRY"
+  fi
+
+  if [ "$DO_BUILD" = 1 ]; then
+    say "Building images locally — op25 takes roughly an hour on a Pi"
+    docker compose build
+    docker compose up -d
+  else
+    say "Pulling prebuilt images from $REGISTRY/$DOCKER_ORG/$DOCKER_REPO"
+    if ! docker compose pull; then
+      die "pull failed. $REGISTRY is public, so this is most likely a login
+  requirement or a transient network error: re-run with DRB_REGISTRY_USER /
+  DRB_REGISTRY_PASS set, or with --build to compile on the Pi (~1h for op25)."
+    fi
+    docker compose up --no-build -d
+  fi
+  ok "stack started"
+else
+  say "Skipping start (--no-start). Run: cd $INSTALL_DIR && make up-prebuilt"
+fi
+
+# ── 7. What the operator does next ──────────────────────────────────────────
+IP="$(hostname -I 2>/dev/null | awk '{print $1}')"
+cat <<EOF
+
+$(printf "${G}Node '%s' installed at %s${N}" "$NODE_ID" "$INSTALL_DIR")
+
+  ref            ${RESOLVED_SHA}
+  images         $([ "$DO_BUILD" = 1 ] && echo "built locally" || echo "pulled from $REGISTRY")
+  dashboard      http://${IP:-<node-ip>}/    (user: ${DASHBOARD_USER})
+  logs           cd $INSTALL_DIR && docker compose logs -f edge-node
+
+NEXT — an admin must approve this node before it can do anything:
+
+  1. Open  <app-url>/settings/nodes
+  2. Approve  "$NODE_ID"
+  3. Assign it a radio system
+
+EOF
+if [ "${GENERATED_DASH:-0}" = 1 ]; then
+  printf "${Y}Generated dashboard password (shown once): %s${N}\n\n" "$DASHBOARD_PASS"
+fi
+if [ ! -s "$CREDS" ]; then
+  if [ -s "$PICKUP_FILE" ]; then
+    printf "${Y}This node has no api_key yet. After an admin approves it, re-run the same\ninstall command — it reuses configs/pickup_secret and will collect the key\n(no --token needed for the re-run).${N}\n\n"
+  else
+    printf "${Y}This node has no api_key and no saved pickup secret, so a plain re-run cannot\nfix it. Re-run with --token DRB-… to enroll; or, if the node is already\napproved, have an admin Reissue key and write it into\n%s by hand.${N}\n\n" "$CREDS"
+  fi
+fi

op25-container/Dockerfile

@@ -12,7 +12,7 @@ ENV DEBIAN_FRONTEND=noninteractive
 # Install system dependencies
 RUN apt-get update && \
     apt-get upgrade -y && \
-    apt-get install git pulseaudio pulseaudio-utils liquidsoap -y
+    apt-get install git pulseaudio pulseaudio-utils liquidsoap usbutils -y
 
 # Install custom PulseAudio system config (enables anonymous access for edge-node)
 COPY system.pa /etc/pulse/system.pa

op25-container/app/routers/op25_controller.py

@@ -1,6 +1,7 @@
 from fastapi import HTTPException, APIRouter
 import subprocess
 import os
+import re
 import signal
 import json
 from models import ConfigGenerator, DecodeMode, ChannelConfig, DeviceConfig, TrunkingConfig, TrunkingChannelConfig, TerminalConfig, MetadataConfig, MetadataStreamConfig, HARDWARE_PRESETS
@@ -69,6 +70,24 @@ def create_op25_router():
     async def get_status():
         return {"status": "running" if _is_running() else "stopped"}
 
+    @router.get("/devices")
+    async def list_sdr_devices():
+        """Enumerate connected SDR-looking USB devices via lsusb.
+
+        Same match heuristic as install.sh's one-shot host check — good enough
+        to answer "is a second SDR plugged in", not a serial-level device
+        binding (op25's DeviceConfig.args has no serial concept yet either).
+        """
+        devices = []
+        try:
+            out = subprocess.run(["lsusb"], capture_output=True, text=True, timeout=5).stdout
+            for line in out.splitlines():
+                if re.search(r"rtl2838|realtek.*283[28]|sdr", line, re.IGNORECASE):
+                    devices.append(line.strip())
+        except Exception as e:
+            LOGGER.warning(f"SDR device enumeration failed: {e}")
+        return {"count": len(devices), "devices": devices}
+
     @router.post("/generate-config")
     async def generate_config(generator: ConfigGenerator):
         try:

secondary-sdr-container/Dockerfile

@@ -0,0 +1,52 @@
+# Secondary-SDR Container — node-26#9
+#
+# Claims the node's SECOND physical SDR (the first is always op25's). Mode is
+# chosen at runtime via the control API, not baked in: dump1090 for ADS-B,
+# AIS-catcher for AIS (op25_2 mode is not handled here yet — see node-26#9).
+#
+# Device claiming is by RTL-SDR index, not serial (op25's DeviceConfig.args
+# has no serial concept either — see op25-container/app/models.py). Index 0
+# is reserved for op25; this container always addresses index 1. That's a
+# real limitation once serial-stable device binding matters (hot-unplug /
+# replug can swap indices) — tracked in node-26#9, not fixed here.
+#
+# UNVERIFIED: this image has not been built or run against real hardware in
+# this session (sandboxed authoring machine, no docker). dump1090 and
+# AIS-catcher's exact CLI flags below are believed correct from their
+# published docs but not confirmed against a real capture — the CTO/QA
+# review before this ships to a real node should build and smoke-test it.
+FROM python:3.14-slim
+
+ENV DEBIAN_FRONTEND=noninteractive
+
+RUN apt-get update && \
+    apt-get upgrade -y && \
+    apt-get install -y --no-install-recommends \
+        git build-essential cmake pkg-config \
+        librtlsdr-dev libusb-1.0-0-dev libssl-dev zlib1g-dev usbutils
+
+# dump1090 (antirez/classic) — ADS-B decoder. --write-json support is a
+# long-standing, well-documented feature of this fork.
+RUN git clone https://github.com/antirez/dump1090 /opt/dump1090 && \
+    cd /opt/dump1090 && make
+
+# AIS-catcher — AIS decoder.
+RUN git clone https://github.com/jvde-github/AIS-catcher /opt/AIS-catcher && \
+    cd /opt/AIS-catcher && mkdir build && cd build && cmake .. && make
+
+EXPOSE 8002
+
+VOLUME ["/configs"]
+
+WORKDIR /app
+COPY ./app /app
+
+COPY docker-entrypoint.sh /usr/local/bin/
+RUN sed -i 's/\r$//' /usr/local/bin/docker-entrypoint.sh && \
+    chmod +x /usr/local/bin/docker-entrypoint.sh
+
+COPY requirements.txt /tmp/requirements.txt
+RUN pip3 install --no-cache-dir -r /tmp/requirements.txt
+
+ENTRYPOINT ["/usr/local/bin/docker-entrypoint.sh"]
+CMD ["python", "main.py"]

secondary-sdr-container/app/config.py

@@ -0,0 +1,20 @@
+from pydantic_settings import BaseSettings
+
+
+class Settings(BaseSettings):
+    # Same rationale as op25-container's OP25_DEBUG_EXPOSE: both containers
+    # share the host network namespace (network_mode: host), so edge-node
+    # reaches this control API over localhost regardless of this flag. False
+    # (default) binds 127.0.0.1; true exposes unauthenticated start/stop to
+    # the node's LAN and should only ever be set for local development.
+    secondary_sdr_debug_expose: bool = False
+
+    class Config:
+        env_file = ".env"
+
+
+settings = Settings()
+
+
+def bind_host() -> str:
+    return "0.0.0.0" if settings.secondary_sdr_debug_expose else "127.0.0.1"

secondary-sdr-container/app/internal/decoder_control.py

@@ -0,0 +1,225 @@
+import json
+import os
+import signal
+import subprocess
+import threading
+from pathlib import Path
+from typing import Any, Dict, List, Optional
+
+from internal.logger import create_logger
+
+LOGGER = create_logger(__name__)
+
+# AIS-catcher streams one JSON object per received message on stdout rather
+# than writing a periodic snapshot file (dump1090's approach above) — so the
+# current-vessel snapshot lives in memory, keyed by mmsi, kept warm by a
+# background reader thread for as long as the subprocess we started is
+# alive. Unlike the pgid-file state, this does NOT survive this API
+# process restarting independently of its subprocess — acceptable since
+# nothing here does that today.
+_ais_vessels: Dict[str, Dict[str, Any]] = {}
+_ais_lock = threading.Lock()
+
+# The node's SECOND SDR, addressed by RTL-SDR index — not serial. op25 always
+# claims index 0 (its DeviceConfig.args has no serial concept either, see
+# op25-container/app/models.py). No hot-plug re-detection: if the two
+# dongles' USB enumeration order changes, this claims the wrong one. Tracked
+# as a real gap in node-26#9, not fixed here.
+SECONDARY_SDR_DEVICE_INDEX = 1
+
+_PGID_FILE = "/tmp/secondary_sdr.pgid"
+_MODE_FILE = "/tmp/secondary_sdr.mode"
+ADSB_JSON_DIR = Path("/tmp/adsb")
+
+
+def _save_state(pgid: int, mode: str) -> None:
+    Path(_PGID_FILE).write_text(str(pgid))
+    Path(_MODE_FILE).write_text(mode)
+
+
+def _read_pgid() -> Optional[int]:
+    try:
+        return int(Path(_PGID_FILE).read_text().strip())
+    except Exception:
+        return None
+
+
+def _read_mode() -> Optional[str]:
+    try:
+        return Path(_MODE_FILE).read_text().strip()
+    except Exception:
+        return None
+
+
+def is_running() -> bool:
+    pgid = _read_pgid()
+    if pgid is None:
+        return False
+    try:
+        os.killpg(pgid, 0)
+        return True
+    except OSError:
+        return False
+
+
+def _adsb_command() -> List[str]:
+    ADSB_JSON_DIR.mkdir(parents=True, exist_ok=True)
+    return [
+        "/opt/dump1090/dump1090",
+        "--net",
+        "--device-index", str(SECONDARY_SDR_DEVICE_INDEX),
+        "--write-json", str(ADSB_JSON_DIR),
+        "--write-json-every", "1",
+    ]
+
+
+def _ais_command() -> List[str]:
+    return [
+        "/opt/AIS-catcher/build/AIS-catcher",
+        "-d", str(SECONDARY_SDR_DEVICE_INDEX),
+        "-o", "JSON",
+    ]
+
+
+def _ais_reader(proc: subprocess.Popen) -> None:
+    """
+    Consume AIS-catcher's stdout, one JSON message per line, and keep the
+    latest report per mmsi. Field names (mmsi/lat/lon/speed/course or
+    heading/shipname or name) are believed correct from AIS-catcher's
+    published JSON output docs but UNVERIFIED against a real capture in
+    this session — same caveat as dump1090's aircraft.json mapping.
+    Malformed/partial lines (e.g. static-data-only messages with no
+    position) are skipped rather than raising, since dropping one line must
+    never kill the reader thread.
+    """
+    if not proc.stdout:
+        return
+    for line in proc.stdout:
+        try:
+            msg = json.loads(line)
+        except Exception:
+            continue
+        mmsi = msg.get("mmsi")
+        if not mmsi:
+            continue
+        # AIS-catcher emits separate message TYPES per mmsi — static data
+        # (name, no position) and position reports (lat/lon, no name) arrive
+        # as distinct lines. Merge onto the existing entry, only overwriting
+        # a field the new message actually carries, so a position-only
+        # report doesn't blank out a name learned from an earlier message.
+        name = (msg.get("shipname") or msg.get("name") or "").strip() or None
+        heading = msg.get("heading") if msg.get("heading") is not None else msg.get("course")
+        updates = {
+            "mmsi": str(mmsi),
+            "name": name,
+            "lat": msg.get("lat"),
+            "lon": msg.get("lon"),
+            "speed_kt": msg.get("speed"),
+            "heading_deg": heading,
+        }
+        with _ais_lock:
+            existing = _ais_vessels.get(str(mmsi), {})
+            for key, value in updates.items():
+                if value is not None:
+                    existing[key] = value
+            _ais_vessels[str(mmsi)] = existing
+
+
+def start(mode: str) -> bool:
+    if is_running():
+        stop()
+
+    if mode == "adsb":
+        cmd = _adsb_command()
+    elif mode == "ais":
+        cmd = _ais_command()
+        with _ais_lock:
+            _ais_vessels.clear()
+    else:
+        raise ValueError(f"Unknown secondary SDR mode: {mode!r}")
+
+    try:
+        needs_stdout = mode == "ais"
+        proc = subprocess.Popen(
+            cmd,
+            preexec_fn=os.setsid,
+            stdout=subprocess.PIPE if needs_stdout else None,
+            text=True if needs_stdout else None,
+            bufsize=1 if needs_stdout else -1,
+        )
+        if needs_stdout:
+            threading.Thread(target=_ais_reader, args=(proc,), daemon=True).start()
+        _save_state(proc.pid, mode)
+        LOGGER.info(f"Started secondary SDR decoder mode={mode!r} pid={proc.pid}")
+        return True
+    except Exception as e:
+        LOGGER.error(f"Failed to start secondary SDR decoder mode={mode!r}: {e}")
+        return False
+
+
+def stop() -> bool:
+    pgid = _read_pgid()
+    if pgid is None:
+        return True
+    try:
+        os.killpg(pgid, signal.SIGTERM)
+    except OSError:
+        pass
+    try:
+        os.remove(_PGID_FILE)
+    except OSError:
+        pass
+    try:
+        os.remove(_MODE_FILE)
+    except OSError:
+        pass
+    return True
+
+
+def status() -> Dict[str, Any]:
+    running = is_running()
+    return {
+        "status": "running" if running else "stopped",
+        "mode": _read_mode() if running else None,
+    }
+
+
+def _read_adsb_snapshot() -> List[Dict[str, Any]]:
+    """
+    Map dump1090's aircraft.json (--write-json output) to the server's
+    telemetry schema. Field names (hex/flight/lat/lon/altitude/speed/track)
+    match dump1090's long-documented JSON format — UNVERIFIED against a real
+    capture in this session, see the Dockerfile's caveat.
+    """
+    path = ADSB_JSON_DIR / "aircraft.json"
+    try:
+        raw = json.loads(path.read_text())
+    except Exception:
+        return []
+
+    out = []
+    for a in raw.get("aircraft", []):
+        icao = a.get("hex")
+        if not icao:
+            continue
+        out.append({
+            "icao": icao.upper(),
+            "callsign": (a.get("flight") or "").strip() or None,
+            "lat": a.get("lat"),
+            "lon": a.get("lon"),
+            "altitude_ft": a.get("altitude"),
+            "ground_speed_kt": a.get("speed"),
+            "track_deg": a.get("track"),
+        })
+    return out
+
+
+def data() -> Dict[str, Any]:
+    mode = _read_mode()
+    if mode == "adsb":
+        return {"mode": mode, "aircraft": _read_adsb_snapshot()}
+    if mode == "ais":
+        with _ais_lock:
+            vessels = list(_ais_vessels.values())
+        return {"mode": mode, "vessels": vessels}
+    return {"mode": mode, "aircraft": [], "vessels": []}

secondary-sdr-container/app/internal/logger.py

@@ -0,0 +1,31 @@
+import logging
+from logging.handlers import RotatingFileHandler
+
+
+def create_logger(name, level=logging.DEBUG, max_bytes=10485760, backup_count=2):
+    debug_log_file = "./secondary-sdr.debug.log"
+    info_log_file = "./secondary-sdr.log"
+
+    logger = logging.getLogger(name)
+    logger.setLevel(level)
+
+    if not logger.hasHandlers():
+        console_handler = logging.StreamHandler()
+        console_handler.setLevel(level)
+
+        debug_file_handler = RotatingFileHandler(debug_log_file, maxBytes=max_bytes, backupCount=backup_count)
+        debug_file_handler.setLevel(logging.DEBUG)
+
+        info_file_handler = RotatingFileHandler(info_log_file, maxBytes=max_bytes, backupCount=backup_count)
+        info_file_handler.setLevel(logging.INFO)
+
+        formatter = logging.Formatter('%(asctime)s - %(name)s - %(levelname)s - %(message)s')
+        console_handler.setFormatter(formatter)
+        debug_file_handler.setFormatter(formatter)
+        info_file_handler.setFormatter(formatter)
+
+        logger.addHandler(console_handler)
+        logger.addHandler(debug_file_handler)
+        logger.addHandler(info_file_handler)
+
+    return logger

secondary-sdr-container/app/main.py

@@ -0,0 +1,13 @@
+from fastapi import FastAPI
+import routers.secondary_controller as secondary_controller
+from config import bind_host
+
+app = FastAPI()
+
+app.include_router(secondary_controller.create_secondary_router(), prefix="/secondary")
+
+
+if __name__ == "__main__":
+    import uvicorn
+
+    uvicorn.run("main:app", host=bind_host(), port=8002, reload=True)

secondary-sdr-container/app/routers/secondary_controller.py

@@ -0,0 +1,40 @@
+from fastapi import APIRouter, HTTPException
+from pydantic import BaseModel
+
+from internal import decoder_control
+from internal.logger import create_logger
+
+LOGGER = create_logger(__name__)
+
+
+class StartBody(BaseModel):
+    mode: str  # adsb | ais
+
+
+def create_secondary_router():
+    router = APIRouter()
+
+    @router.post("/start")
+    async def start(body: StartBody):
+        try:
+            ok = decoder_control.start(body.mode)
+        except ValueError as e:
+            raise HTTPException(status_code=400, detail=str(e))
+        if not ok:
+            raise HTTPException(status_code=500, detail="Failed to start secondary SDR decoder")
+        return {"status": f"secondary SDR started ({body.mode})"}
+
+    @router.post("/stop")
+    async def stop():
+        decoder_control.stop()
+        return {"status": "secondary SDR stopped"}
+
+    @router.get("/status")
+    async def get_status():
+        return decoder_control.status()
+
+    @router.get("/data")
+    async def get_data():
+        return decoder_control.data()
+
+    return router

secondary-sdr-container/docker-entrypoint.sh

@@ -0,0 +1,3 @@
+#!/bin/bash
+mkdir -p /tmp/adsb
+exec "$@"

secondary-sdr-container/requirements.txt

@@ -0,0 +1,3 @@
+uvicorn
+fastapi
+pydantic-settings

setup.sh

@@ -1,164 +0,0 @@
-#!/usr/bin/env bash
-# Interactive first-time setup for a DRB edge node.
-# Installs system dependencies (Docker, make, curl) then writes .env
-# and optionally builds + starts the stack.
-set -e
-
-GREEN='\033[0;32m'; YELLOW='\033[1;33m'; CYAN='\033[0;36m'; RED='\033[0;31m'; NC='\033[0m'
-cd "$(dirname "$0")"
-
-echo -e "${CYAN}DRB Edge Node Setup${NC}"
-echo "-------------------"
-
-# ── Dependency installation ──────────────────────────────────────────────────
-install_deps() {
-  if ! command -v apt-get &>/dev/null; then
-    echo -e "${YELLOW}⚠  apt-get not found — skipping auto-install. Ensure docker, make, and curl are installed.${NC}"
-    return
-  fi
-
-  echo ""
-  echo -e "${CYAN}Installing system dependencies…${NC}"
-  sudo apt-get update -qq
-
-  local pkgs=()
-  command -v make &>/dev/null  || pkgs+=(make)
-  command -v curl &>/dev/null  || pkgs+=(curl)
-  command -v git  &>/dev/null  || pkgs+=(git)
-
-  if [ ${#pkgs[@]} -gt 0 ]; then
-    echo "  Installing: ${pkgs[*]}"
-    sudo apt-get install -y -qq "${pkgs[@]}"
-  fi
-
-  # Docker — use get.docker.com if not present
-  if ! command -v docker &>/dev/null; then
-    echo "  Installing Docker via get.docker.com…"
-    curl -fsSL https://get.docker.com | sudo sh
-    # Allow current user to run docker without sudo
-    sudo usermod -aG docker "$USER"
-    echo -e "${YELLOW}  ⚠  Docker group added. You may need to log out and back in for it to take effect.${NC}"
-    echo -e "${YELLOW}     If 'docker compose' fails below, run: newgrp docker${NC}"
-  else
-    echo -e "${GREEN}  ✓ docker$(docker --version | grep -oP ' \d+\.\d+\.\d+' | head -1)${NC}"
-  fi
-
-  # Docker Compose plugin check (comes with Docker Engine ≥ 20.10)
-  if ! docker compose version &>/dev/null 2>&1; then
-    echo -e "${RED}  docker compose plugin not found. Installing…${NC}"
-    sudo apt-get install -y -qq docker-compose-plugin
-  else
-    echo -e "${GREEN}  ✓ docker compose $(docker compose version --short 2>/dev/null || true)${NC}"
-  fi
-
-  echo -e "${GREEN}✓ Dependencies ready${NC}"
-}
-
-install_deps
-
-if [ -f .env ]; then
-  echo -e "${YELLOW}Warning: .env already exists.${NC}"
-  read -rp "Overwrite? [y/N] " yn
-  [[ "$yn" =~ ^[Yy]$ ]] || { echo "Aborted."; exit 0; }
-fi
-
-# --- Node identity ---
-echo ""
-echo "Unique node ID — no spaces (e.g. node-ossining, node-002)"
-read -rp "NODE_ID: " NODE_ID
-while [[ ! "$NODE_ID" =~ ^[a-zA-Z0-9_-]+$ ]]; do
-  echo "  Use letters, numbers, dashes, underscores only."
-  read -rp "NODE_ID: " NODE_ID
-done
-
-echo ""
-read -rp "Node display name [$NODE_ID]: " NODE_NAME
-NODE_NAME="${NODE_NAME:-$NODE_ID}"
-
-# --- GPS ---
-echo ""
-echo "GPS coordinates (decimal degrees — used for the map)"
-read -rp "Latitude  [0.0]: " NODE_LAT; NODE_LAT="${NODE_LAT:-0.0}"
-read -rp "Longitude [0.0]: " NODE_LON; NODE_LON="${NODE_LON:-0.0}"
-
-# --- C2 server ---
-echo ""
-echo "C2 server — hostname or IP of the machine running the server stack"
-read -rp "C2 server host: " C2_HOST; C2_HOST="${C2_HOST:-localhost}"
-read -rp "C2 API port [8888]: " C2_PORT; C2_PORT="${C2_PORT:-8888}"
-
-# --- MQTT ---
-echo ""
-echo "MQTT credentials (must match MQTT_NODE_USER/PASS in the server .env)"
-read -rp "MQTT port [1883]: " MQTT_PORT; MQTT_PORT="${MQTT_PORT:-1883}"
-read -rp "MQTT username [drb-node]: " MQTT_USER; MQTT_USER="${MQTT_USER:-drb-node}"
-read -rsp "MQTT password: " MQTT_PASS; echo ""; MQTT_PASS="${MQTT_PASS:-change-me-node}"
-
-# --- Icecast ---
-# Generated, not defaulted. Icecast binds all interfaces, and the SOURCE
-# password is what lets a caller push audio into the stream users listen to as
-# live radio -- so a shared default is worse here than a forgotten password.
-# Pressing Enter gives you a random one rather than a known one.
-gen_password() {
-  if command -v openssl >/dev/null 2>&1; then
-    openssl rand -base64 24 | tr -d '
-'
-  else
-    head -c 24 /dev/urandom | base64 | tr -d '
-'
-  fi
-}
-
-echo ""
-echo "Icecast passwords (local container). Press Enter to generate a random one."
-read -rsp "Source password [generate]: " ICECAST_SOURCE; echo ""
-if [ -z "$ICECAST_SOURCE" ]; then ICECAST_SOURCE="$(gen_password)"; echo "  generated a random source password"; fi
-read -rsp "Admin password [generate]: "  ICECAST_ADMIN;  echo ""
-if [ -z "$ICECAST_ADMIN" ];  then ICECAST_ADMIN="$(gen_password)";  echo "  generated a random admin password"; fi
-
-# --- Write .env ---
-cat > .env <<EOF
-# Node Identity
-NODE_ID=${NODE_ID}
-NODE_NAME="${NODE_NAME}"
-NODE_LAT=${NODE_LAT}
-NODE_LON=${NODE_LON}
-
-# MQTT — point to your C2 server
-MQTT_BROKER=${C2_HOST}
-MQTT_PORT=${MQTT_PORT}
-MQTT_USER=${MQTT_USER}
-MQTT_PASS=${MQTT_PASS}
-
-# C2 server for audio upload
-C2_URL=http://${C2_HOST}:${C2_PORT}
-# API key is provisioned automatically via MQTT after admin approves the node
-
-# Icecast (local container — usually no need to change)
-ICECAST_SOURCE_PASSWORD=${ICECAST_SOURCE}
-ICECAST_ADMIN_PASSWORD=${ICECAST_ADMIN}
-ICECAST_HOST=localhost
-ICECAST_PORT=8000
-ICECAST_MOUNT=/radio
-
-# OP25 container (usually no need to change)
-OP25_API_URL=http://localhost:8001
-OP25_TERMINAL_URL=http://localhost:8081
-EOF
-
-echo ""
-echo -e "${GREEN}✓ .env written for node '${NODE_ID}'${NC}"
-echo ""
-
-read -rp "Build and start now? [Y/n] " start
-if [[ ! "$start" =~ ^[Nn]$ ]]; then
-  echo ""
-  echo "Building images (op25 takes ~10 min on first run)…"
-  docker compose build
-  docker compose up -d
-  echo ""
-  echo -e "${GREEN}✓ Node '${NODE_ID}' started.${NC}"
-  echo "   → Check the dashboard — it will appear as pending approval."
-else
-  echo "Run 'make up' when ready."
-fi